Tag Archives: construction of life

The Premises

Output – in the outer insulation wall. Solving this problem, you can go different ways. It all depends on the specific conditions and financial opportunities. One of the most popular methods (effective and However, relatively inexpensive) – the imposition of an additional layer of plaster on the outside of the building. We must bear in mind that the traditional sand-cement plaster have a low vapor permeability capacity. Because of this between the wall and the coating may be collected condensate. The surface of the supporting structure in such an environment will be constantly wet.

As a result, a plaster layer occur periodically during the freezing process and thawing, and – of mold. Sooner or later these factors provoke the detachment of the plaster coating. As dry plaster? To prevent this trouble, use osushivayuschie (also called sanifying) plaster with special additives. The basis of their lime-cement, because in conjunction with cement lime gives a lighter and "soft" plaster. But it is additive composition provides porosity, necessary for non-stop movement of steam and salt accumulation. It is worth mentioning another circumstance: on the insulation of the walls in this case it is not, but raising the temperature a couple of degrees due to plastering, of course, in itself a pleasant fact. If the internal moisture inside the walls dry walled iron screws, fittings – all as new, with no trace of rust, then the problem – internal condensation.

And here their tactics. Condensate formed inside the premises, is directly linked to such a notion as "dew point". If you change the external air temperature in relation to the inner even at normal humidity on the walls of the condensation. The dew point depends on the temperature difference (the walls and the air in the apartment), plus the humidity in the room. This process is clearly known to all on the effect of steamed windows.

Comments Off on The Premises

Filed under News

Surrounding Plants

Tuff with plants can be installed on a balcony, patio, rock debris, raised beds, rock gardens. Alpine garden requires to build much time and effort, a careful thinking through assortment of plants and proper choice for them. Site for rock garden should be clearly visible, to be protected from north winds and not hidden by the shadow of trees. Stones for the rock garden should be the same type. Minimum size rock garden – 2,5 x1, 5 meters, but on this small area you can grow many different plants, not only the Alpine, which compares well with stone and decorate the whole season slide beautiful foliage and flowers. Planning for planting, you must pre-study literature on the needs of the desired plants and determine whether they fit the conditions of the site. In parallel, it to conduct a reverse process – select suitable plants that will be satisfied with the soil, humidity, lighting, allocated area.

Construction, the device alpine slides 1. Selecting a location for the rock garden. Rock garden should organically fit into the surrounding space and is well overlooked. Alpinarium better alpinariysmotritsya on a slope or hill (natural or man-made), surrounded by grass on a background stand aloof trees, shrubs or tall herbaceous plants, although other options may be acceptable (our rock garden is located on a very small artificial hill, the north and west are apple trees in the south – a pond, and all together form a harmonious ensemble). The opinions of different authors concur that the orientation of rock garden on the north is extremely undesirable – the plants will be open to cold winds, but disagree about what the most favorable orientation.

Comments Off on Surrounding Plants

Filed under News