GrantsFinancialSVS

Your Home for Financial Success

Seal Retaining Ring

On one side of the case there is a thread (1 / 4, 3 / 8 inch), which is fitting screwed into the body what a filtration stage, but on the other side is a hole for the tube with pre-established there and seal retaining ring. Unlike the tube, where everything is clear, john guest fittings are manufactured different shapes (straight, angular, all kinds of tees, etc.). Depending on the situation and tasks can be applied more fittings suitable for construction. Now directly on the assembly process. Note that for the work you do not need any special tools, and even respected women who already have things more important than this nonsense if they understand simple principle that can easily to assemble such a eyeliner.

Step 1. With a sharp knife, make a cross-section of necessary piece of the tube. End of the tube should be smooth, undeformed, burr-free. Step 2. Carefully insert the end of the tube fitting into the hole and push it all the way in inside.

Step 3. In order to check the quality of the connection john guest, pull the tube back. If done correctly, the teeth of the locking ring does not allow you to pull the tube back. Congratulations! You are just three steps, quickly and accurately perform work for which our fathers and grandfathers would have spent considerably more time and effort. In addition to the skill of connection you need to know how these things to separate in this case lies the most crafty raisin producer. As already it has become clear, simple pulling of the tube has nothing to fail. All that is required – to squeeze the snap ring to the fitting body and pull up. In this position, the locking ring teeth are weakened and what seemed to this impossible, is carried out without problems. It is important to add that if the disengagement of the tube and fitting inside the filter should not maintain pressure, otherwise the tube can not be pulled out of the compound. So, figuring not many in particular, which includes a plastic liner john guest, you can safely carry out work on the assembly and connection of domestic filter with separate faucet. Good luck. (Full article with illustrations on the site)